Message Explanations

• A Helix must have one or more loops of track.
• A frozen layer contains selected track. Command cannot be executed.
• A large font has been selected....
• All description fields present in the Turnout...
• All fields listed in the Group dialog must contain data....
• All values specified in the Turnout Designer must be...
• Angle must be between 0° and 360°.
• Are you sure you want to delete the NNN definition(s)?
• Bitmap create or write function failed.
• Bitmap is too large.
• Can't delete multiple points at once
• Cannot Enable Grid; spacing must be greater than 0
• Cannot Group Bumper Track. The track has been unselected.
• Cannot Group selected track type s.
• Cannot Join Bezier or Cornu track if Easement is not Cornu
• Cannot Join; Easements do not align or abut.
• Cannot Join; Selected endpoints are on same track.
• Cannot Join; Selected endpoints are on same track.
• Cannot Join; Selected tracks are parallel.
• Cannot Show Grid; spacing must be greater than 0
• Cannot change elevation mode.
• Cannot freeze current layer
• Cannot hide current layer
• Cannot join from a turntable, try to a turntable
• Cannot open New Parameter File: FILENAME
• Cannot select a frozen layer
• Cannot split TYPE track
• Cannot turn current layer into a Module
• Cannot write to parameter file: FILENAME
• Car Index number duplicated.
• Connection parameters reset to maximum values.
• Connection parameters reset to minimum values.
• Copy/Paste buffer is empty. There is nothing to Paste.
• Critical file damaged!...
• Crossover length is too short. Correct...
• Curved track is too large.
• Definition name is already in use. Saving this...
• Do you want to save the changes made to your Layout?
• Duplicate column headers found in Car Import file.
• Endpoint already on Path.
• File version ld is greater than supported...
• File version ld is greater than supported...
• File version ld is greater than supported...
• File version ld is greater than supported...
• First|Second track is already connected.
• Frog angle prevents placement of points. Move points to opposite side of frog.
• Frog|Points cannot be placed on a turnout, circle or helix.
• Insufficient space between existing stall tracks.
• Joining endpoints with different elevation stations
• Joining tracks with differing elevations (N.NNN)
• Label description is hidden
• Label descriptions not visible
• Length of object is too short.
• Maximum allowed page size is W x H
• New Parameter File has no CONTENTS line: FILENAME.
• No Car Prototypes are defined....
• No Cars are defined for the current scale....
• No Parameter File Map for CONTENTS
• No Paths were detected when grouping selected Tracks.
• No Point on a Poly shape selected.
• No Turnouts|Structures are available.
• No layer was found that has no contents, so the module can not be imported
• No layer was found that wasn't frozen. Layer 0 is unfrozen.
• No pages selected for printing.
• No path between Profile and selected endpoint.
• No track(s) selected!
• Numeric values on the Car Description...
• Object has moved beyond room boundaries.
• Parallel separation must be greater than 0, or the new gauge must be different than the old.
• Part Number for this Manufacturer already exists....
• Playback file version ld is...
• Playback: Cannot find list entry: NAME
• Playback: unknown action NNN
• Please select a printer from the Print Setup dialog.
• Points are to close to frog; move away.
• Polygons must have at least 3 nodes.
• Prototype name already exists....
• Radius must be greater than 0.
• Radius must be less than 10000.
• Required column headers missing from Car Import file.
• Rescaled tracks do not fit within layouts room parameters...
• Scale "SCALE1" is not valid. We will substitute a dummy scale based on "SCALE2". See 'Help|Recent Messages' for details.
• Scale index (NNN) is not valid. Do you want use the current layout scale (SCALE)? Or create an "Unknown" scale? See 'Help|Recent Messages' for details.
• Second track must be selected|unselected
• Select position prior to entering Text.
• Selected page is out of bounds.
• Selected shapes must define a rectangular area ...
• Selected tracks deviate too much or are too far apart from each other.
• Specified command disabled.
• Split position between Turnout Points
• Split position not on unique path
• The CSV import file is empty or can't be read.
• The Circle or Helix will not fit within the layouts room parameters (Height and Width).
• The current layer was defined as frozen. It is now unfrozen.
• The curves created by the Turnout Designer for a cornu curve have more than 128 segments....
• The entered text is too long. Maximum length is d.
• The entered text was too long for the text object. It was truncated.
• The following car has no Part Number...
• The following car has no dimensions and a...
• The following column in the Car Import file will be ignored:...
• The position of a turnout or turntable cannot be changed while occupied by a train.
• The resulting length of one track piece is shorter than the minimum length of d.
• There are no structures to choose from in the structure...
• There are no turnouts to choose from in the turnout...
• There are no unconnected end points for this track
• There are too few sections in this loop.
• There is nothing to redo!
• There is nothing to undo!
• Too many columns in CSV import file.
• Too many track segments in Group.
• Track cannot be changed.
• Track endpoint is within turntable radius.
• Track intersection not possible; move points away from frog.
• Track is too short by N.NNN
• Track radius (N.NNN) is smaller than easement minimum (N.NNN).
• Track segment N not on Path for Turnout
• Track segments appear too late in Group segment list.
• Tracks in a frozen layer cannot be modified.
• Tracks in a module cannot be modified.
• Turnout definition contains non-track segments....
• Turntable diameter must greater than 0.
• Undo assertion failure s:d...
• While processing DXF file s, a line that is too long was generated....
• While processing DXF file s, an error occurred.
• While processing DXF file s, too many layers were in the drawing. The maximum is d.
• While processing DXF file s, too many track end points were in the drawing. The maximum is d.
• While processing Layout file s, d lines were skipped because they were not recognized.
• While processing Parameter file s, d lines were skipped because they were not recognized.
• XTrackCAD Version s: Please note that this Beta Version of XTrackCAD is still undergoing final testing before its official release. The sole purpose of this Beta Version is to conduct testing and obtain feedback. Should you encounter any bugs, glitches, lack of functionality or other problems, please let us know immediately so we can rectify these accordingly. Your help in this regard is greatly appreciated!
• You have specified a large bitmap....
• [X Y] is not a track